Can anybody help me identify this key? The closest match I could find was a car key from a 2000 Honda Civic, but I don’t think it’s exactly right. : Locksmith


level 1

I don’t think that’s for a ‘00 civic, the base where it’s blank is a lot shorter than what my key was.



Source link

Car key question : Locksmith


Hello everyone. I have lost the keys to my car (Fiat 500) and I don’t have a replacement one. I called my local Fiat dealership and they told me that in order to get a new one I need to bring the car to them but I don’t have a way of doing so. I was wondering if it is possible to have a locksmith come and make just a simple key cut, no need for the remote or anything like that.

Thank you in advance and have a great day!



Source link

Not sure if this is allowed, but I’m replacing the entire ignition in my car and would like to know if it’s possible to reprogram it to fit my new existing key : Locksmith


The ignition is like any other car part. You can probably find the right service manuals and tools to do it, but I remember the first time I replaced head gaskets it was a bloodbath.

Your best bet is to just find a local locksmith that does auto work and take it in to their shop.



Source link

Car key stuck



Hi Everyone,

I had a new key made for my car. When I received it I noticed that all edges were very sharp compared to the old key, but I guess this is to be expected, the old key has been used for 17 years.

I inserted the key to the ignition, and it did not feel as smooth as the old one, but it worked. I could start the car. I could also remove the key.

But the second time I tried to use it, it got stuck in the ignition and I cannot remove it…

This is the type of key:

https://www.breakeryard.com/sites/default/files/mp/d3/62796854_9b98.jpeg

This is how it looks in my ignition:

https://streamable.com/bhv8y7

What I tried:

– I tried to wiggle it in many different ways hoping that whatever is holding it will let go, I spent 20 minutes trying to get it out, but no luck.

– I got frustrated so I also tried to pull it quite hard, but it is really stuck there…

– I sprayed some WD40 inside, but it did not help.

I have a few questions:

  1. Is there anything else I can try myself to remove the key?
  2. If I call a locksmith, do you think he will be able to remove the key without damaging the lock so I can keep using the old keys?
    (In the end I don't really need this new key itself, I needed a new remote control, but got the whole thing. Remote control works, key got stuck. If I manage to get it out I can throw it away and never use it again.)

Thanks in advance!

submitted by /u/ekkki
[comments]



Source link

Would you say its worth getting into the car clone key and all keys lost as a business from scratch in uk…i may have a trial from an independent dealer , what fo i need to consider , what do i need to watch out for? : Locksmith


UK I run zedfull autel 508, fvdi, xtool, obd helper, tango, orange5 and of course your cutting machine a vast amount of Lishi picks, blades, remotes etc and everything is changing so more eeprom work is occurring.

All in all if you think you can do it then go for it it but be prepared for a rough year or so of business. You will also be competing with people who have done it longer and got experience. There are more factors also do you have a mortgage and how will it be paid etc also you need to research your area to see whom is working it etc



Source link

Can I use MAF Sensor Cleaner instead of Brake Cleaner to clean my car door lock? : Locksmith


I read that I could use non-chlorinated brake cleaner and compressed air to clean a car door lock, wait for it to dry, then use Tri-Flow or Houdini to lube. I was about to run out and get some brake cleaner but then I found this comment where someone used MAF Sensor cleaner instead. I have MAF Sensor cleaner lying around – is this safe to use?

Additional background:

My car key will turn the ignition and trunk lock, but not the car door lock anymore. The spare key doesn’t turn the lock either. Fairly old car, 2004 Accord. I tried using WD-40 already since this has worked for me 2-3 times before in the past but this time it didn’t work. This is before I found this subreddit and learned not to use WD-40. Before I go out and get my cylinder replaced, I wanted to try cleaning and lubing the lock myself.



Source link

Call Now ButtonCall Now!